Model Number: NT-1100#0913M
Brand Name: N-net
Key Specifications/Special Features:
10/100M media converter dual fiber single mode 20km SC connectorOverviewThe NT-1100-DIP/1100S-DIP series are media converter with the DIP SwitchThe DIP switch can set the conversion mode (store and forward/cut-through), the operate mode (full-duplex/half-duplex), operate speed (10/100M) and link fault pass-through (LFP) functionLFP (LLCF/LLR) can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the netLLCF (link loss carry forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmitLLR (link loss return) means when a device connected to the converter and the fiber line loss the link, the converter's TP port will disconnect the link of transmitBoth can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net
Key features
- 10/100Mbps auto-sensed, facilitating network upgrade
- Built-in efficient switching core to implement flow control and reduce broadcast packets
- Full-duplex and half-duplex auto-sensed or DIP-Switch setting
- Supports auto-sense of MDI/MDI-X, facilitating system commissioning and installation
- DIP-switch supports setting half/full-duplex of FX
- DIP-switch supports 10/100Mbps store-and-forward and 100Mbps cut-through transmission
- LFP (Link Fault Pass-through) function
- Support the transmission of 100Base-FX or STM-1, compatible with other devices
- Supports low-time lag transmission
- Support the transmission of extra-long packets up to 1600 bytes
- Extremely low power consumption (less than 2W), reliable and stable performance
- Options in single mode dual fiber or multi-mode dual fiber
| DIP-Switch |
Off(Default) |
On |
| PIN-1 |
LFP function DISABLED |
LFP function ENABLED |
| PIN-2 |
Store and forward conversion mode |
Cut-Though conversion mode |
| PIN-3 |
Auto-Negotiation mode for TP port |
Force operation mode for TP port |
| PIN-4 |
TP port operate in 100Mbps |
TP port operate in 10Mbps |
| PIN-5 |
TP port operate in Full duplex mode |
TP port operate in Half duplex mode |
| PIN-6 |
Fiber port operate in Full duplex mode |
Fiber port operate in Half duplex mode |
| Note: When setting the TP operation mode (PIN-4 or/and PIN-5), The TP port must be operate in Force mode (PIN-3 ON). |
By certification [File Integrity]
